Tuesday, 7 March 2017

How to recover you zpanel password

login to your server and type the ff :

cat /root/passwords.txt

Gilmon D. Bernal
Posted by at No comments:

Monday, 14 November 2016

GLOBE router Factory login



Factory login 
username: admin
password: admin

GLOBE DSL Basic login
username: user
password: user


GLOBE DSL ADVANCED FULL ACCESS (admins best friend page)
(note: copy and paste to make sure its correct)
username: Admin
Password: 3UJUh2VemEfUtesEchEC2d2e


Globe dsl PVC Settings:
Encapsulation: LLC
VPI = 0
VCI=35
QoS=UBR


Globe 4G LTE (Internet Only)


username: user
password: @l03e1t3
 
 
 
Posted by at No comments:

Wednesday, 26 October 2016

Remove Breezing Forms Footer Link

Remove Breezing Forms Footer Link

Breezing Forms is a popular Joomla extension for creating interactive forms, however its free version displays a footer link to the developer. Here is a short and simple guide to remove the link. I have tested it for Joomla 2.5.x and Breezing Forms 3.0.x
Open the file breezingforms.php through FTP or cPanel File Manager; This file is located in components/com_breezingforms
Posted by at No comments:

Wednesday, 21 September 2016

Tips on how to install zpanel

latest update:  

Install zPanel on Ubuntu 12.04


Install zPanel on Ubuntu 12.04

Logged into the server using Putty as root, run following command to update apt cache,
apt-get update
Then run following command to download the zPanel install script,
wget https://raw.github.com/zpanel/installers/master/install/Ubuntu-12_04/10_1_1.sh
Make the script executable,
chmod +x 10_1_1.sh
Then run the script
sudo ./10_1_1.sh
zPanel installation sometimes gets stuck at Restarting web server apache2 … waiting …done
You’ll have to confirm again that you want to run the installer of zPanel. The you’ll be asked few questions. A important one will be FQDN for the zpanel. Type in the sub-domain name you’re willing access zPanel from. It’s the sub-domain you’ve created earlier. Mine was test.cenpri.com. Then you’ll be asked for public IP address of the server. Type in your server’s IP address and confirm the installation.
It’ll take few minutes to complete the installation. The script will install all necessary components to host websites on your server including Apache, php, MySQL, FTP, phpMyAdmin and many more. You’ll see your login details on CLI after successful install of zPanel. It’ll look similar to below image. Make sure you save your login details as this will be the last time it’s being displayed.
zpanel-complete
Finally, you’ll be asked to restart your server. And when your server comes back online, you can access zPanel from your server’s IP address or sud-domain you setup earlier.



--------------------------------------------------------------------------------------------------------





ZPanel Ubuntu Installer 10.1.0

Install a clean Ubuntu server with ZPanelX
LOG INTO YOUR SERVER AS THE ROOT USER, do not use sudo.
  1. Download the correct installer for your system:
    2. 64 Bit Installer wget http://www.zvps.co.uk/downloads/ubuntu/10-1-0/installer-10-1-0-ubuntu-64.sh.x.tar.gz
    Or
    32 Bit Installer wget http://www.zvps.co.uk/downloads/ubuntu/10-1-0/installer-10-1-0-ubuntu-32.sh.x.tar.gz
  2. Unzip the tarball
    3. 64 Bit Installer tar -xf installer-10-1-0-ubuntu-64.sh.x.tar.gz
    Or
    32 Bit Installer tar -xf installer-10-1-0-ubuntu-32.sh.x.tar.gz
  3. Change the script to be executable
    4. 64 Bit Installer chmod +x installer-10-1-0-ubuntu-64.sh.x
    Or
    32 Bit Installer chmod +x installer-10-1-0-ubuntu-32.sh.x
  4. Install pre-required packages:
    5. apt-get install curl
  5. Run the ZPanelX installer
    6. 64 Bit Installer ./installer-10-1-0-ubuntu-64.sh.x
    Or
    32 Bit Installer ./installer-10-1-0-ubuntu-32.sh.x
  6. Follow the on screen instructions during the installation.
  7. The zadmin, MySQL root & postfix passwords are all stored in /root/passwords.txt after installation.
  8. Lastly run the following command to fix the zpanel stored IP (broken api call) REPLACE 0's with your actual public IP:
    9. setso --set server_ip 000.000.000.000

ZPanelCP Ubuntu 10.1.0 Update

Upgrade an existing 10.0.2 server to 10.1.0
Warnings about this update, do NOT update until you have read this section:

  1. Only use this script to update from 10.0.2 to 10.1.0
  2. If you haven't manually updated the postfix MySQL password a new password will be generated and stored in /root/passwords.txt
LOG INTO YOUR SERVER AS THE ROOT USER, do not use sudo.

  1. Download the correct updater for your system:
    2. 64 Bit Updater wget http://www.zvps.co.uk/downloads/ubuntu/10-1-0/updater-10-1-0-ubuntu-64.sh.x.tar.gz
    Or
    32 Bit Updater wget http://www.zvps.co.uk/downloads/ubuntu/10-1-0/updater-10-1-0-ubuntu-32.sh.x.tar.gz
  2. Unzip the tarball
    3. 64 Bit Updater tar -xf updater-10-1-0-ubuntu-64.sh.x.tar.gz
    Or
    32 Bit Updater tar -xf updater-10-1-0-ubuntu-32.sh.x.tar.gz
  3. Change the script to be executable
    4. 64 Bit Updater chmod +x updater-10-1-0-ubuntu-64.sh.x
    Or
    32 Bit Updater chmod +x updater-10-1-0-ubuntu-32.sh.x
  4. Run the ZPanelX updater
    5. 64 Bit Updater ./updater-10-1-0-ubuntu-64.sh.x
    Or
    32 Bit Updater ./updater-10-1-0-ubuntu-32.sh.x
  5. Follow the on screen instructions during the installation.
  6. You will need your MySQL root password to perform this update (can be obtainted from /etc/zpanel/panel/cnf/db.php)
  7. If a new postfix password has been generated during the update it will be stored in /root/passwords.txt
  8. Lastly run the following command to fix the zpanel stored IP (broken api call) REPLACE 0's with your actual public IP:
    9. setso --set server_ip 000.000.000.000

ZPanelCP Ubuntu 10.0.2 Update

Upgrade an existing 10.0.1 server to 10.0.2
Warnings about this update, do NOT update until you have read this section:

  1. If you are updating from 10.0.1 to 10.0.2
    2. You MUST run the 10.0.1 update script regardless of the version currently shown in zpanel (10.0.0 or 10.0.1). BEFORE running this update.
  2. After the 10.0.2 update, the zadmin password has been reset and stored in /root/passwords.txt
    3. ALL User Passwords Need either Resetting by the zadmin or reset by the user using the forgotten password functionality
  3. The zadmin API key has also been reset, if you are using this in any other application please update it.
  4. Be aware this update makes a LOT of system configuration changes to all third party applications used by zpanel.
    5. Check the running AND functionality of all systems after the updates
  5. If you have any issues after the installation please post in http://forums.zpanelcp.com/forumdisplay.php?63-General-Support-amp-Questions
    6. PLEASE PUT [update] at the start of your post TITLE so the support team at ZPanelCP can identify what type of support ticket they are dealing with
LOG INTO YOUR SERVER AS THE ROOT USER, do not use sudo.

  1. Download the correct updater for your system:
    2. 64 Bit Updater wget http://www.zvps.co.uk/sites/default/files/downloads/ubuntu-12-04/package/installer-x86_64-10-0-2.sh.x.tar.gz
    Or
    32 Bit Updater wget http://www.zvps.co.uk/sites/default/files/downloads/ubuntu-12-04/package/installer-x86-10-0-2.sh.x.tar.gz
  2. Unzip the tarball
    3. 64 Bit Updater tar -xf installer-x86_64-10-0-2.sh.x.tar.gz
    Or
    32 Bit Updater tar -xf installer-x86-10-0-2.sh.x.tar.gz
  3. Change the script to be executable
    4. 64 Bit Updater chmod +x installer-x86_64-10-0-2.sh.x
    Or
    32 Bit Updater chmod +x installer-x86-10-0-2.sh.x
  4. Run the ZPanelX installer
    5. 64 Bit Updater ./installer-x86_64-10-0-2.sh.x
    Or
    32 Bit Updater ./installer-x86-10-0-2.sh.x
  5. Follow the on screen instructions during the installation.
  6. At the end please record down the mysql root password. (you will need this to access mysql via the root user and also for running future updates to zpanel) All Passwords are stored in /root/passwords.txt
  7. Lastly run the following command to fix the zpanel stored IP (broken api call) REPLACE 0's with your actual public IP:
    8. setso --set server_ip 000.000.000.000

ZPanelCP Ubuntu 10.0.1

Upgrade an existing 10.0.0 server to 10.0.1
Warnings about this update, do NOT update until you have read this section:

  1. If you are updating from 10.0.0 to 10.0.1
    2. You MUST update to 10.0.2 straight afterwards
  2. After the 10.0.2 update, the zadmin password has been reset and stored in /root/passwords.txt
    3. ALL User Passwords Need either Resetting by the zadmin or reset by the user using the forgotten password functionality
  3. The zadmin API key has also been reset, if you are using this in any other application please update it.
  4. Be aware this update makes a LOT of system configuration changes to all third party applications used by zpanel.
    5. Check the running AND functionality of all systems after the updates
  5. If you have any issues after the installation please post in http://forums.zpanelcp.com/forumdisplay.php?63-General-Support-amp-Questions
    6. PLEASE PUT [update] at the start of your post TITLE so the support team at ZPanelCP can identify what type of support ticket they are dealing with
LOG INTO YOUR SERVER AS THE ROOT USER, do not use sudo.

  1. Download the correct update script for your system:
    2. 64 Bit Updater wget http://www.zvps.co.uk/sites/default/files/downloads/ubuntu-12-04/package/installer-x86_64-10-0-1.sh.x.tar.gz
    Or
    32 Bit Updater wget http://www.zvps.co.uk/sites/default/files/downloads/ubuntu-12-04/package/installer-x86-10-0-1.sh.x.tar.gz
  2. Unzip the tarball
    3. 64 Bit Updater tar -xf installer-x86_64-10-0-1.sh.x.tar.gz
    Or
    32 Bit Updater tar -xf installer-x86-10-0-1.sh.x.tar.gz
  3. Change the script to be executable
    4. 64 Bit Updater chmod +x installer-x86_64-10-0-1.sh.x
    Or
    32 Bit Updater chmod +x installer-x86-10-0-1.sh.x
  4. Run the ZPanelX Updater
    5. 64 Bit Updater ./installer-x86_64-10-0-1.sh.x
    Or
    32 Bit Updater ./installer-x86-10-0-1.sh.x
  5. Follow the on screen instructions during the installation.
  6. At the end please record down the mysql root password. (you will need this to access mysql via the root user and also for running future updates to zpanel) All Passwords are stored in /root/passwords.txt
  7. Lastly run the following command to fix the zpanel stored IP (broken api call) REPLACE 0's with your actual public IP:
    8. setso --set server_ip 000.000.000.000
Posted by at No comments:

Monday, 22 February 2016

how to secure "http://localhost/phpmyadmin/" phpmyadmin on your LAN XAMPP 5.X

 goto C:\xampp\phpMyAdmin

open
 config.inc.php

edit the ff:

Set the Login type to use HTTP Basic authentication (cookie is default):
$cfg['Servers'][$i]['auth_type'] = 'http'; Configure phpMyAdmin to access MySQL directly on IP 127.0.0.1. *There is no point in resolving "localhost", and this will also remove the chance of localhost resolving to IPv6 loopback address "::1", which MySQL might not be bound to (causing all kinds of issues):
$cfg['Servers'][$i]['host'] = '127.0.0.1'; Allow users to login that have no password set (ex: root):
$cfg['Servers'][$i]['AllowNoPassword'] = true; Define phpMyAdmin's Control user (internal use):

$cfg['Servers'][$i]['controlhost'] = 'localhost';
$cfg['Servers'][$i]['controluser'] = 'pma';
$cfg['Servers'][$i]['controlpass'] = 'pmapass';
Use all of the advanced phpMyAdmin features:

$cfg['Servers'][$i]['pmadb'] = 'phpmyadmin';
$cfg['Servers'][$i]['bookmarktable'] = 'pma__bookmark';
$cfg['Servers'][$i]['relation'] = 'pma__relation';
$cfg['Servers'][$i]['table_info'] = 'pma__table_info';
$cfg['Servers'][$i]['table_coords'] = 'pma__table_coords';
$cfg['Servers'][$i]['pdf_pages'] = 'pma__pdf_pages';
$cfg['Servers'][$i]['column_info'] = 'pma__column_info';
$cfg['Servers'][$i]['history'] = 'pma__history';
$cfg['Servers'][$i]['table_uiprefs'] = 'pma__table_uiprefs';
$cfg['Servers'][$i]['tracking'] = 'pma__tracking';
$cfg['Servers'][$i]['designer_coords'] = 'pma__designer_coords';
$cfg['Servers'][$i]['userconfig'] = 'pma__userconfig';
$cfg['Servers'][$i]['recent'] = 'pma__recent';
$cfg['Servers'][$i]['users'] = 'pma__users';
$cfg['Servers'][$i]['usergroups'] = 'pma__usergroups';
$cfg['Servers'][$i]['navigationhiding'] = 'pma__navigationhiding';

Gilmon D. Bernal
Posted by at No comments:

Tuesday, 8 December 2015

NRR - Noise Reduction Rating

NRR - Noise Reduction Rating - Help

All hearing protectors supplied in the USA should be provided with an NRR figure. It can be used to estimate the sound level at the ear when wearing the protectors.
To calculate the level at the ear, fist measure the worker's noise exposure, either in dB(A) or dB(C). This level can be entered into the NRR Calculator, along with information about the regulations that you are following: OSHA or NIOSH as each of these uses a different calculation.
nrr calculator
The NoiseMeters NRR Calculator uses the following calculation methods:
Regs Freq.
Wgt		 Calculation
     
OSHA A Lprot = L - (NRR - 7) / 2



  C Lprot = L - NRR / 2
     
NIOSH A Lprot = L - (NRR - 7)



  C Foam Earplugs:
  Lprot = L - (NRR * 0.5)
    Other Earplugs:
  Lprot = L - (NRR * 0.3)
    Earmuffs:
  Lprot = L - (NRR * 0.75)
Where:
L is the measured level or TWA
NRR is the Noise Reduction Rating provided by the hearing protector manufacturer
Lprot is the estimated sound level at the ear when wearing the hearing protection

for more info:  please see the ff: https://www.noisemeters.com/apps/occ/help/protector-nrr.asp
Posted by at No comments:

Monday, 26 October 2015

phpmyadmin security for xampp 1.8.1

how to secure your phpmyadmin
Steps
1. please see the link:  http://localhost/security/

make sure that your xampp are active

2. select your language

3. click the link on your page..

To fix the problems for mysql, phpmyadmin and the xampp directory simply use
=> http://localhost/security/xamppsecurity.php <=   [allowed only for localhost]

just follow the instructions and your good to go!!
 
Posted by at No comments:
Subscribe to: Posts (Atom)